According to statistics, the injection molding parts are molded and cooled in the plastic mold, because the molding temperature and thermal expansion coefficient of each epoxy resin are not the same, therefore, the plastic mold must have the temperature adjustment system software
In industrial production, with a variety of presses and special tools installed on the press, through the pressure of metal or non-metallic materials to produce the required shape of parts or products, this special tool is collectively referred to as the mold.
In the process of injection molding, plastic particles are injected into the mold by the injection molding machine, and after the appropriate cooling time, they become molded injection parts, so what needs to be paid attention to in the cooling of injection molding.
Any injection molding products can not be separated from the quality of qualified injection molding, injection molding quality directly determines the quality of injection molding products qualified and production efficiency, then the injection molding production when the selection of materials need to pay attention to what.
Injection molding parts processing process will produce pressure, if not properly solved, often lead to injection molding products quality problems, understand which process pressure for the injection molding plant to produce qualified goods is very important.
Plastic samples for auto parts13
Plastic samples for auto parts12
Plastic samples for auto parts11
Plastic samples for auto parts10
Plastic samples for auto parts9
Plastic samples for auto parts8
Plastic samples for household appliances19
Plastic samples for household appliances18
Plastic samples for household appliances17
Qingdao Juchang Plastic Injection Co., Ltd
Qingdao Jimo District environmental protection Industrial Park environmental protection Road No. 17
+86 135 8932 0203
Copyright © Qingdao Juchang Plastic Injection Co., Ltd